Step 4: the second (middle) layer

Quick answerFind a top-layer edge with no yellow on it. Turn the top so its front colour sits above the matching centre (it looks like an upside-down T). If its top colour matches the right centre, do U R U' R' U' F' U F. If it matches the left centre, do U' L' U L U F U' F'. Repeat for all 4 middle edges.

Beginner method · step 4 of 8 · Updated 2026-11-15

Loading the 3D cube…

What you're aiming for

How to do it

  1. Keep yellow on top. The finished white layer stays on the bottom.
  2. Find an edge in the top layer with no yellow. Edges with yellow belong on top, so skip those.
  3. Turn the top (and the whole cube if needed) so the edge’s front colour sits above the matching centre. You’ll see an upside-down T.
  4. Look at the edge’s top colour. Is that centre on the right or on the left?
  5. Right: U R U' R' U' F' U F
  6. Left: U' L' U L U F U' F'
  7. Repeat until all 4 middle edges are in.

The moves

Tap play to watch the sequence on a solved cube. Drag the cube to spin it.

Right insert

Middle edge to the right

U R U' R' U' F' U F

Left insert

Middle edge to the left

U' L' U L U F U' F'

Common mistakes

New to the letters? See cube notation explained.

Questions

Why are there two sequences?

They are mirror images. One moves an edge down to the right, the other to the left.

How do I remember them?

Both start by turning the top away from where the edge goes, then do the trick on that side, then the front. Practising each a few times locks it in.

How many moves is the second layer?

Each edge takes 8 moves plus a few top turns to line it up.

Try it on your real cube

TwistTutor turns this guide into short lessons with a practice cube and a coach. Stuck on a scrambled cube? Take a photo of each side and follow the moves.