Step 1: make the daisy

Quick answerHold the cube with the yellow centre on top. Find the 4 edge pieces that have white on them and bring each one up so its white side faces up, next to the yellow centre. Before you turn a side, turn the top so you don't knock off a petal you've already placed. No moves to memorise.

Beginner method · step 1 of 8 · Updated 2026-11-15

Loading the 3D cube…

What you're aiming for

How to do it

  1. Hold the cube with yellow on top. Keep it that way for the whole step.
  2. Find an edge piece with white on it. Edges have 2 colours; corners have 3.
  3. If the white edge is in the middle layer, turn the side it’s on so the white comes up to the top layer, white facing up.
  4. If it’s in the bottom layer with white facing down, turn the top until the spot above it is empty, then turn that side twice F2.
  5. If white is facing sideways, turn that side once to move it into the middle layer, then use step 3.
  6. Before every side turn, check the top: turn the top first so an empty spot sits where the petal will land.
  7. Repeat until all 4 petals are around the yellow centre.
No moves to learn. This step is all looking and turning. Watch the cube above: the piece to find flashes.

Common mistakes

New to the letters? See cube notation explained.

Questions

Why start with a daisy instead of a white cross?

The daisy is easier: you only need white facing up, not the side colours matching. Step 2 turns the daisy into a correct white cross in 4 quick moves.

Do I need to memorise any moves for the daisy?

No. You look, turn and check. The only rule is to turn the top first so you don’t knock a petal off.

Does it matter which way I hold the cube?

Yes. Keep yellow on top. The white cross will form on the bottom in step 2, so you never have to flip the cube over.

Try it on your real cube

TwistTutor turns this guide into short lessons with a practice cube and a coach. Stuck on a scrambled cube? Take a photo of each side and follow the moves.